Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Perhaps the window or door handles don't meet up properly or are hard to use.
It is crucial that the double glazed doors work smoothly, otherwise you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can repair your door lock for a reasonable price.
Snapped Key
It can be a hassle when a key is snapped inside the lock. It could also be a security risk, as the door might not lock and could leave you vulnerable to burglars. Fortunately, there are some quick fixes that you can attempt to fix the issue and get your door working properly again.
First, remember to stay calm. If you panic you could end up pushing the damaged key piece further into the lock.
Next, spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also use a screwdriver to break up any pieces stuck. If you have a piece of the key that is stuck and is not being removed, grab it with a paperclip or other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key further into the keyway.
Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades can also work well for this. If you don't happen to have any of these items then you can bend a hook with needle-nosed pliers. Finally, a pair of tweezers can be used to grip and remove the remaining bit of the broken key.
If you're unable to pull the broken piece of the key out, try using a lock de-icer. It's available in many hardware stores and works by freezing any moisture that may be present inside the lock.
If none of these strategies seem to be helping then it's probably time to call in a locksmith. Fitlocks experts can quickly fix problems such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also alter the double glazing door mechanisms to ensure that they are more easy to use. You can schedule a double-glazing repair online or contact us to discuss your needs.
Broken Cylinder
A broken cylinder can pose a major security risk. Luckily, it's an easy repair for professional locksmiths to complete. To repair the cylinder, locksmiths must tap it. This can be accomplished with the hammer or other tool. However, the best method is to make use of a wire or a long match. Place the match or wire's end close to the keyway. The locksmith will strike the lock to crack it open. This is more secure than using the hammer, which could cause damage to the lock.
The most common cause of cylinder head cracks is overheating. This can occur when the cylinder block and head are made of different metals, such as cast iron and aluminum. When the different metals are heated and cool at different rates, it may create hotspots locally that expand faster than the rest of the cylinder head, thus leading to cracks.
Corrosion can be a reason for cracks in the cylinder. If the head and block of the cylinder are not maintained properly, they can be corroded or rust and cause them to expand more than anticipated. This could lead to cracks in the future.
If your uPVC window or door lock is stiff and requires a lot more pressure to turn it could be due to a variety of causes. A faulty locking mechanism, misalignment or an old handle are the most common causes of this issue.
This is a straightforward and cost-effective fix that a majority of homeowners with double glazing can perform. A professional locksmith will typically be able to solve this problem within an hour after arriving at your residence. They can repair the locking mechanisms, or replace the window handles, and also change the gearboxes, depending on the specific requirements of your home. A skilled locksmith will always be able to inform you of the most cost-effective solution for your home. They can even suggest upgrades to 3 Star security euro cylinders TS007 that give you an additional layer of protection against burglars. It's a small price to get the peace of mind that comes from knowing your uPVC door is secure.
Broken Handle
Window handle locks are complex mechanisms that wear out with time and use, so it's no surprise that check here they sometimes break. It can be difficult to determine the reason behind the broken window handle lock and fix it correctly.
Fixing your broken handle, regardless of whether it's the internal latch or locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It could be costly to repair or replace your handle if it is not done correctly and can also harm the frame and lock of your door.
With the window in the open position then loosen the screw holding the handle with a screwdriver. This should be located on the inside of the back read more plate, normally hidden by a screw cover for aesthetic reasons. It is important to not lose any internal components of the handle such as the plates and levers on either side. Keep them in the same arrangement to make it easier to replace if necessary.
Then, using an additional screwdriver loosen the screw that connects the handle with the spindle on the back. Once the screw is free, you can remove the handle and take out the broken spindle. Replace it with a brand new one, making sure it's the same size as the old one (you can usually find these on the internet or at hardware stores) and securely screw it into the right place. Be careful not to tighten too much because this could damage the handle or the window frame.
Close the handle and try it. It should function smoothly, and you will be able to open your windows once more.
Be sure to double-check that your uPVC window is shut correctly when you're using the handle. If they're not closing properly cause damp and draughts inside your home as and also affecting your home's energy efficiency. Core Sash Windows is a local window company that can adjust the hinges of your window frames to ensure that they shut correctly.
Broken Spindle
It is more typical for the spindle to break rather double glazing companies near me than the handle. This is most typical in uPVC tilt and turn windows. These kinds of windows require a handle which operates a locking mechanism in the window frame. The double glazed repairs near me handle is connected to a centre rod that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism does not open after the handle has been turned, it is most likely the spindle is broken. This can be a frustrating problem.
There are solutions to this issue. A skilled locksmith can quickly and efficiently fix this problem. They can disassemble the window handle by using a tool that removes the wheel part of the mechanism where the spindle is. This is done without causing any damage to the handle or causing other damage to the frame of the window.
After removing the wheel the technician can examine the spindle and determine here the reason for its break. This involves breaking the spindle into its component parts and carefully recording their general condition as in addition to any specific areas of wear or damage. The process is carried out in a clean environment by skilled technicians.
The next step is to clean the damaged spindle. This assists in removing any dirt or other debris that could be hindering its normal function. After this the spindle can be repaired or replaced. If it's being replaced, the technician will need a dowel of a similar size to the one used in the first and drill mating holes into both pieces of the spindle. This will ensure that the spindle will fit perfectly with the handle.
If the damaged spindle is beyond repair, it could be required to replace it completely. Home centres sell generic substitutes however if your window design is unique you'll need to contact an expert in woodworking or cabinet making who can make the exact part. Once the spindle has been installed, it is attached to the handle. Place the screw holes on the handle to the existing screws in the frame. Once the handle is firmly seated, you can operate your uPVC windows.