Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.
It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to ensure that you are doing everything you can to keep your windows in good condition.
Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.
If you are going to try to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the fabric instead of onto the floor where they could be trodden under and cause further damage.
It's a good idea to tape the gap once the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may think about the security door with an integrated window, as this will offer the best of both worlds.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.
Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll need to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.
If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism wears out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, website you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.
3. Water Leaks
If you wake up to wet floors and mouldy walls every time it rains it's crucial to take action. The leaks of water from windows do are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
It is a fairly easy fix that can be done by any competent DIYer. Based on the severity of the issue the caulking used previously may require removal before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.
It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you may have to replace the window.
Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.
If the leakage is occurring between the double-glazed glass, it is more likely that the issue is more with the seal rather than the frame. Again this can easily be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges may be to blame when your uPVC window is difficult to open or it blows open with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical part hinges will be damaged over time. Changing window repair near me a window hinge is an easy process, but it's easier with someone else to help you hold the frame up.
Check that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrow on each hinge, this shows which way the window should open.
Faulty window hinges could be caused by improperly opening the window in a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be happy to give you suggestions.
It is also important to ensure that the hinges are lubricated website regularly. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. They can be fixed by website giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can also be misaligned, and again it's possible to give them a thorough clean, however in some cases it might be necessary to have these replaced.
These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity lenses. upvc window and door repairs near me This will help to regulate indoor temperatures and decrease the possibility of draughts.
One of the most effective methods to reduce drafts is to use an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking cold air.
Your windows made of upvc will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional immediately.